LD1001

LoRaWAN Gateway with Built-in Network Server

Plug in, add your nodes, see data. ChirpStack runs inside the gateway — no separate server, no cloud account, no internet needed to get started.

The LD1001 is an original Linxdot gateway product. Siliqs is the value-added system provider for the LoRaWAN system: gateway management software, pre-shipment configuration, Siliqs node integration and technical support.

Price on request

LD1001 LoRaWAN gateway

Siliqs firmware

A complete LoRaWAN network in one box

Siliqs ships the LD1001 configured and adds its own management firmware on top of the standard gateway hardware.

Built-in ChirpStack v4

The network server and an MQTT broker run on the gateway. Works stand-alone on a LAN; integrate over MQTT (ChirpStack v4 JSON) when you are ready.

Mesh relay between gateways

Set a unit to Relay and place it where the main gateway can’t hear your devices. It forwards LoRaWAN traffic to the main gateway over LoRa — power only, no network cable.

ABP Auto-Resync after power loss

ABP nodes such as SQC485I restart their frame counter after a power cut. The LD1001 detects the restart and rebuilds the session automatically — typically within a minute, no manual reset on the server.

Simple-mode web console

Status at a glance, device cards with RSSI / SNR and latest values, network, time and password — in Traditional Chinese or English. A wrong IP setting rolls back on its own after 3 minutes.

Device catalogue with decoders

Pick the model, paste the keys, done — SQC485I, SQS-TH-I and Milesight UC502 come with decoders already set up. Any other LoRaWAN Class A / C device can be added in ChirpStack.

Or use your own server

Switch from the built-in server to your own ChirpStack-compatible server over MQTT. Advanced mode also offers the Semtech UDP packet forwarder.

Auto-Resync works with the built-in server for nodes added from the Simple-mode device page. To allow recovery, repeated frame counters are not rejected for these nodes — where stricter security is required, use OTAA nodes. See the datasheet for the full conditions.

Works with the Siliqs product line

Nodes are added from the gateway’s own web page, with the decoder already set up.

Node Function Join mode
Siliqs SQC485I RS485 / Modbus to LoRaWAN industrial node — puts existing meters and controllers on the network ABP
Siliqs SQS-TH-I Wireless temperature and humidity node ABP
Milesight UC502 Multi-interface LoRaWAN controller, e.g. with an RS485 temperature and humidity sensor OTAA

Indoor version, outdoor version planned

Same gateway, same software. The outdoor enclosure is not final yet — enclosure, availability and lead time on request.

Indoor Outdoor (planned)
Enclosure ABS, 190 × 190 × 50 mm Die-cast aluminium, 217 × 217 mm; IP67 as specified by the enclosure maker
Power 12 V DC adapter (included) PoE over the Ethernet cable
LoRa antenna 3 dBi antenna included, RP-SMA N-type female; 16 cm N-type antenna mounts directly
Ethernet RJ45, 10/100/1000 Mbps Waterproof RJ45 panel connector
Mounting Desktop / shelf Pole (4 × M6 bracket holes) or wall

Specifications

Selected highlights — see the datasheet for the full tables and items still to be confirmed.

LoRa concentratorSemtech SX1302, 2 × SX1250, 8 channels
Shipped channel planAS923-1 (Taiwan), 923.2 – 924.6 MHz
Max TX power27 dBm conducted (set within local regulations)
Network serverChirpStack v4 built in; MQTT broker on the gateway
DevicesLoRaWAN 1.0.x Class A / C, ABP and OTAA
ProcessorRockchip RK3566 quad-core, 2 GB RAM, 32 GB eMMC, ATECC608 secure element
InterfacesGigabit Ethernet, 2.4 GHz Wi-Fi (on-site setup), Bluetooth 5.0, USB-A, USB-C
Power consumption5 W peak; about 1.3 W measured in operation (relay role)

Gallery

Illustrations; refer to the actual product.

Downloads

Datasheet and user manual, Rev 0.1 (preliminary) — cover indoor and outdoor versions; the manual also applies to the LD1002.

Get the LD1001

Price and lead time on request — tell us about your site and whether you need the indoor or outdoor version.